TODAY WE WILL INSTALL THE 88-98 CHEVY GMC HIGH BEAM CONVERSION KIT

THESE INSTRUCTIONS ARE EVEN MORE COMPLETE THAN NEEDED, BUT LETS GET INTO DETAILS ANYHOW!

1) THIS IS WHAT WE START WITH, A 93 CHEVY 1500 SERIES TRUCK

2) THIS IS WHAT YOUR HIGH BEAM LIGHTS LOOK LIKE BEFORE WE GET STARTED

4) LETS OPEN THE HOOD AND GET STARTED!

5) REMOVE THE PARKING LIGHT FROM THE PASSENGERS SIDE

6) DRILL AN 1/8" HOLE HERE TO MOUNT THE CONVERSION BOX

7) NOW MOUNT THE CONVERSION BOX WITH THE BLACK GROUND WIRE
UNDER THE SCREW HEAD IT SHOULD LOOK LIKE THIS WHEN INSTALLED

8) NOW REMOVE THE ORIGINAL BATTERY CABLE HOLDER LOCATED HERE

9) INSERT THE NEW BATTERY TERMINAL EXTENDER INTO THE BATTERY CABLE
**Some kits no longer need this battery terminal extender, and will not be included with the kit**

10) NOW BOLT THE NEW BATTERY TERMINAL EXTENDER INTO THE
BATTERY WITH A 5/8" WRENCH. REMOVE THE SMALL NUT, AND MOUNT THE RING TERMINAL
BE CAREFUL NOT TO PINCH THE WIRES!

11)ON THIS STEP YOU CAN SEE THE FUSE HOLDER.
IF YOUR SYSTEM EVER QUITES, CHECK THIS FIRST!

12) INSTALL THE T-CLIPS, ONE ON THE GREEN WIRE, AND ONE ON THE BROWN WIRE

13) PLUG THE WHITE WIRE FROM THE CONVERSION BOX TO THE GREEN WIRE
PLUG THE BLUE WIRE FROM THE CONVERSION BOX TO THE BROWN WIRE

NEXT INSTALL THE PARKING LIGHT

14) CLEAN OFF YOUR TOOLS AND CLOSE THE HOOD

15) TURN ON YOUR LOW BEAM AND LETS CHECK YOUR WORK!

16) NOW TURN ON YOUR HIGH BEAM, AND YOUR DONE!

WOW!! WHAT A DIFFERENCE!!!

IF YOU HAVE ANY QUESTIONS, PLEASE CALL US HERE AT THE SHOP:
419-947-6955