$0.00

99-02 Chevy GMC High Beam Conversion Install Instructions
[99HBINST]
(Ships Free)

99-02 Chevy GMC High Beam Conversion Install Instructions
Here we are going to install a High Beam Kit for the 99-02 Chevy GMC Trucks.

This truck is a 2002 Chevy 2500HD.....so lets get started!

This is what we will end up with!! LETS GET STARTED!!!







Open the hood and remove the left or drivers side head light,
by removing these pins that hold the head light in place.







After you have removed the head light, & right above the grill,
there is a 10MM bolt that goes to the core support that need to be removed.

Now with the bolt we just removed, we need to install our High Beam Conversion Box,
along with the ground wire, and tighten the bolt back in place.

Now take the high beam socket on the left side, and the low beam socket on the right side,
and place the T-Tap Connectors like shown. Both wires on the high beam will get the
T-Tap Connectors, and only the YELLOW wire on the low beam will get connected.







Now with the 3 remaining wires, we will plug the YELLOW from the High Beam Conversion Box to the YELLOW wire on the low beam wiring harness.

We will also plug the PURPLE wire from the High Beam Conversion Box to the PURPLE wire on the high beam harness. The remaning wire has the fuse link on it, and this plugs into the ORANGE wire on the high beam harness.

Now plug the head light sockets back into the head light bulbs, and check your work before
we re-install the head light assembly. Then remove your tools and close the hood.

If all is working fine, then your on this step! This is your LOW beam Head Lights.

And now this is what your HIGH beam lights look like! All 4 bulbs are lighting up the road!







If you have any question about this install, please call us!
419-947-6955 and ask for an Install Tech to help you.

Reviews (1)

Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
0 items
Share Product
Share via E-Mail
Share on Facebook Share on Twitter