98-04 Chevy S10 GMC S15 High Beam Conversion Instructions
Please note this is free instructions that come with the high beam kit, these are here for reference, no need to order these instructions as every kit comes with full & complete instructions!
If you want to order this S10 high beam kit, please see the correct link
Here we will install the S10 High Beam Kit in a 2002 Chevy S10 Blazer
Lets open the hood and get started. On the right side, or Passengers
there are 2 head light reatiner pins that need to be removed. Simply pull the
retainer pins up, and pull the head light out, and unhook the high beam socket,
low beam socket, and the side marker light.
Pull back the wire loom so you can see the colors of the low beam & high beam
wiring. In the kit you are supplied 3 T-taps, and they are placed on the wires
as shown. The low beam YELLOW & BLUE get a T-Tap, and the high beam PURPLE wire
will also get a T-Tap installed.
Now you will need to drill a 1/8" hole so you can mount the high beam conversion
box, and the ground wire. Be sure NOT to drill into your radiator!!!
After the high beam conversion box is installed with the ground wire, it should
look like this.
Were almost done! We now plug the PURPLE wire into the PURPLE wired T-Tap on the
high beam side of the wiring harness. And then plug the YELLOW wire to the YELLOW
wired T-Tap, and the fuse link wire, to the BLUE wire, also on the low beam side
**If your high beam kit ever quits working, check this fuse link located here**
Check your work before you re-install your head light, and then your done!
Your ride should look like this now with the HIGH BEAMS on....lighting up the road!
If you have any questions about your install, please contact us at:
And ask for an install tech person to help you.