00-05 Impala High Beam Kit Install Instructions

00-05 Impala High Beam Kit Install Instructions
00-05 Chevy Impala High Beam Conversion Instructions

Here we will install the 00-04 Chevy Impala High Beam Kit in a 2004 Chevy Impala

Lets open the hood and get started. On the left side, or Drivers
there are 2 head light reatiner pins that need to be removed. Simply pull the
retainer pins up, and pull the head light out, and unhook the wiring hanress socket.
Clean the wiring back and hold the plug in hand like this with the clip facing you
as seen in this picture. The top wire will be BLUE & the bottom wire will be BLUE.

On the clip you will notice small letters showing what holes the wires are in.

These will be the wires you will install the red T-Taps into.

Now install the conversion box with the supplied screw to the core support
beside the head light mounting bracket. (Use a pilot hole if needed).
It does not have to go up against it, just close enough the head light will still fit!

Were almost done! We now re-install the head light and make sure you
install both retainer clips. It should look like this when your done

Your ride should look like this now with the HIGH BEAMS on....lighting up the road!

If you have any questions about your install, please contact us at:


And ask for an install tech person to help you.


Customers who bought this product also purchased
00-04 Chevy Impala High Beam Kit
00-04 Chevy Impala High Beam Kit
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
We Accept
0 items
Share Product
Share via E-Mail
Share on Facebook Share on Twitter