04-12 CHEVY COLORADO
04-12 GMC CANYON
Here we will install the 04-12 Chevy Colorado, GMC Canyon High Beam Kit in a 2005 Chevy Colorado
Let’s open the hood and get started.
On the drivers & passengers side of the truck you will remove the head lights & parking lights as well as the grill.
Be sure to take out the parking lights first. A tab is located here.
You have two 10mm bolts right here that need to be removed in order to take out the head lights.
Now unplug the head light bulbs from the sockets, and remove the head light. but the wire loom back to expose the head light wire colors. (Use a pair of pliers to install the T-Taps.)
Install a T-Tap on the PINK high beam wire, and plug in the PINK wire from the conversion box.
Install a T-Tap on the BLUE low beam wire, and plug in the BLUE wire from the conversion box.
Install a T-Tap on the ORANGE low beam wire, and plug in the FUSE LINK wire from the conversion box.
Inside the core support, you will see an ear that you will drill an 1/8" bole in. Install the conversion box with the round ring terminal here.
It should look like this when it is installed and plugged in!
Check your work. If everything is working correctly, then re-loom your wiring and tap ip the harness like it was stock. Tuck away the extra wiring with the supplied zip ties.
Then re-install the lights and grill, close the hood and your done!
If you have any questions about your install, please contact us at:
419-947-6955