99-02 CHEVY TRUCK
99-02 GMC TRUCK
Here we will install the 99-02 Chevy, GMC Truck High Beam Kit in a 2002 Chevy 2500 HD
Let’s open the hood and remove the drivers side head light, by removing these pins that hold the head light in place.
Above the grill there is a 10mm bolt that goes to the core support that needs to be removed.
Install the conversion box and the BLACK ground wire with the bolt we just removed and tighten the bolt back in place.
Now take the high beam socket on the drivers side, and the low beam socket on the passengers side. Place the T-Tap connectors like shown. Both wires on the high beam will get a T-Tap connector, and one on the YELLOW wire from the low beam.
Plug in the YELLOW wire from the conversion box to the YELLOW wire from the low beam wiring harness
Plug in the PURPLE wire from the conversion box to the PURPLE wire on the high beam wiring harness.
Plug in the FUSE LINK wire to the ORANGE wire from the high beam wiring harness.
Now plug the light sockets back into the head light, and check your work.
Re-install the head light assembly and your done!
If you have any questions about your install, please contact us at:
419-947-6955